Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Create a distributed Setup by following our manual
  2. Create one or more viewer sites. For this example I will create viewer1 and viewer2
  3. On the master:
    1. Go to the Master Site → WATO - CONFIGURATION and edit the connection slave
    2. Go to 'Use Livestatus Proxy Daemon' and enable 'Allow access via TCP '.
      • TCP port: Type in one free TCP port. In my example I use 6560
      • Restrict access to IP addresses: If you want to restrict, type in the addresses
      • Encrypt communication: Is not working at the moment. We have created an internal Ticket for that

        Info




  4. Create a new viewer Site
  5. Configuration of cascading Livestatus on Site viewer1
    • Go to WATO - CONFIGURATION → Distributed Monitoring
      • BASIC SETTINGS

        Note

        Site ID should be the name of the master site where the slave is connected


        Info


      • STATUS CONNECTION

        Info

        Use here the Port of Step 3 (Allow access via TCP Setting of Site Slave configured on Master Site)

        Encryption should be 'Plain text'

        If you want to connect a second viewer, you need to enable 'Allow access via TCP' again! Please use a different port This only optional


      • Leave the remaining options at their defaults 
  6. Configuration of cascading Livestatus on Site viewer2
    • Go to WATO - CONFIGURATION → Distributed Monitoring
      • BASIC SETTINGS

        Info


      • STATUS CONNECTION

        Info


        Use here the Port we configured in Step 5 (Allow access via TCP Setting configured on viewer1)

        Encryption should be 'Plain text'

        If you want to connect a second viewer, you need to enable 'Allow access via TCP' again! Please use a different port This only optional


...